Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 24.001 SLD 5
- Maximum reliability due to PALTRONIC
- More lifting power due to A-HPLS
- Additional applications with Single Link Plus
- Shorter load cycle times due to High Speed extension
Brochures
| Max. lifting moment | 23.1 |
| Max. lifting capacity | 6200 |
| Max. hydraulic outreach | 14.9 |
| Max. manual outreach | 19.1 |
| Slewing angle | 400° |
| Slewing torque | 2.3 |
| Stabilizer spread (std) | 5.0 m |
| Fitting space required (std) | 0.91 |
| Width folded | 2.54 |
| Max. operating pressure | 360 |
| Pump capacity | 65 - 90 l/min |
| Dead weight (std.) | 2260 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 22.7 mt | 8.2 m | 400 | 2.3 | 36.0 Mpa | 65-90 | 2250 kg | 2310 mm | 2550 mm | 905 mm | 8100 mm | - | 2750 kg |
| B | 22.2 mt | 10.4 m | 400 | 2.3 | 36.0 Mpa | 65-90 | 2410 kg | 2310 mm | 2550 mm | 905 mm | 10300 mm | - | 2050 kg |
| C | 21.8 mt | 12.6 m | 400 | 2.3 | 36.0 Mpa | 65-90 | 2540 kg | 2310 mm | 2550 mm | 975 mm | 12500 mm | - | 1560 kg |
| D | 21.5 mt | 14.9 m | 400 | 2.3 | 36.0 Mpa | 65-90 | 2640 kg | 2310 mm | 2550 mm | 975 mm | 14800 mm | - | 1220 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
